Component Stock ClymR

Suitable for Gunsmith Installation.

https://www.gunwerks.com/web/image/product.template/20268/image_1920?unique=5b0dac3
    • Stock Finish Launch Edition (only compatible with launch edition stock/finish)
    • Length of Pull
    • Bottom Metal
    • Action Inlet
    • Action Length
    • Action Hand
    • Recoil Lug Thickness
    • Barrel Inlet Contour
    • Barrel Shank Length
    • Service Options

1,225.00 1,225.00 1225.0 USD

1,225.00

This combination does not exist.

Share this product


DISCLAIMER

Gunwerks Component Stocks are inletted as “Gunsmith Fit”, meaning significant work is needed to achieve final fitment with your barreled action. This is work most often performed by a Gunsmith. While Gunwerks stands by the quality and build of our stocks and do our best to provide a stock inletted to fit your setup, the infinite variability of pairing our stocks with other manufacturers' products leaves too many variables for every stock to fit perfectly every time. By ordering a Gunwerks component stock, you agree that you have read and understand these conditions. We’ve provided more detail on specific inletting functions and fitment considerations found below.


THE CLYMR STOCK

MADE FOR THE MOUNTAINS

When it comes to rifles, lightweight and long-range capable usually don't belong in the same sentence. Traditional ultralight rifles have a lot going against them when it comes to features and the capability to perform well in long-range hunting applications. YET, the ClymR is exactly that.

The ClymR stock is the lightest in the Gunwerks lineup. Like an Italian sports car, it's light, fast, and extremely capable thanks to several key features and advanced technology.


Negative Comb

Gunwerks' signature negative comb decreases felt recoil while allowing for higher recoil pad positioning. This positions the recoil pad more in line with the barrel, thus reducing muzzle rise. The result is improved shot-to-shot consistency, less punishment from recoil, spotting impacts, and quicker follow-up shots.

    Flat Toe Line

    The classic stock design creates a steeper toe line. Ours is designed to balance the functionality of bag manipulation and recoil tracking.  Before the shot it's easy to adjust the buttstock height by moving the bag fore and aft.  After the shot, as the gun recoils and the toe line tracks along the bag, it won’t drop as much as traditional designs. This helps the shooter stay on target through the recoil impulse.

    Optimized Forend

    The forend has a wide flat surface for tracking along a supported rest or pack. The bipod attachment hardware extends the surface forward to prevent any obstructions to the recoil impulse that could cause a point of impact shift. And we achieved this all with a compact, 1" shorter forend that balances well with shorter 18-22" barrels.  

    Ergonomic Grip Design

    The ClymR grip is unlike anything the firearms industry has ever seen.  By studying the ergonomics of shooter interaction, and the rifle recoil impulse in super light rifles, we identified the grip as a key interface with major influence on long-range precision and accuracy. Our grip places the thumb and the palm in the most advantageous locations for control. An integrated thumb shelf encourages proper grip technique and reduces over-gripping and torquing of the rifle when firing.

    CUSTOM FITMENT DISCLAIMER

    Before ordering, please read the following additional information. Gunwerks component stocks require some level of fitment and gunsmithing to pair your barreled action with our inletted stocks and bedding blocks. While Gunwerks stands by the quality and build of our stocks and do our best to provide a stock inletted to fit your setup, the infinite variability of pairing our stocks with other manufacturers' products leaves too many variables for every stock to fit perfectly every time. As such, expect some work needed to make a perfect fit. By ordering a Gunwerks component stock, you agree that you have read and understand these conditions.

    Areas Of Special Attention You Or Your Gunsmith Will Need To Custom Fit

    Ejection Port
    In our research setting up action inlets, most action manufacturers weren’t even able to provide specifics about inlet dimensions that fit with their own actions. To ensure best fit, we opted to leave ejection ports un-inletted. You’ll need to sand or file your stock to match the ejection port profile of your particular action

    Bolt Notch
    Various manufacturers offer swept or straight bolt notches, or custom variations of each. Your stock will arrive with a minimalist bolt notch cut, but may need opened up or modified to fit your particular bolt handle geometry

    Rear Tang
    Similar to ejection port and bolt notches, rear tang geometry varies so much from action manufacturer to manufacturer, and even from piece to piece, we opted to inlet a basic rear tang geometry that will require some filing or sanding to obtain a perfect fit. We refuse to inlet gappy or sloppy “one size fits all” inlets, so instead, opted to leave final, custom fitment to the customer or gunsmith doing the final fitting.

    Barrel Channel Inlet
    Gunwerks has worked with various barrel makers to model the list of available barrel channel inlets closely. Barrel channel inlets should fit well, however slight variations in shank length of the barrel, straightness of your barrel and barrel/action tenon, and a few other factors beyond our control may result in some fine tuning of fitment needed.

    Bottom Metal Inlet
    We’ve modeled bottom metal inlets closely, however, you may need some work done to machine pillars to fit. Badger and Hawkins M5 detachable bottom metals need some modification to clear the internal dimensions of the gunwerks internal bedding block.


    Recently viewed Products