Gunwerks Suppressors
They Say Silence is Golden, But We Like Ours in Matte Black Cerakote.
We approached suppressors from an entirely different perspective. The result is the ideal suppressor design for long range hunting and precision rifle work with modern magnum rifle cartridges.
INNOVATION
ENGINEERED FOR LONG RANGE SHOOTING
When it comes to design and performance, if there's one thing we need in a suppressor, it's precision. The Gunwerks 6IX and 8IGHT suppressors are engineered for ultimate precision and repeatability. Your rifle will shoot as good or better with these suppressors with minimal point of impact shift.
OPTIMIZED FOR MODERN HUNTING CARTRIDGES
Most suppressors are designed around 5.56 and 7.62 military rounds. Since we're using larger, modern hunting magnums in the 6mm, 6.5mm, 7mm and 30 Calibers, we designed around these specifications for a truly optimized suppressor for what's being used in the field.
DESIGN
Modular Thread Adapters
1/2x28 and 5/8x24 thread adapters included. Modular adapters feature our Tru-Mount Taper for repeatable accuracy. With our hex key geometry and machined wrench flats, mounting and removal is simple. Sticking adapters is a thing of the past!
Tubeless, Welded Design
The tubeless design keeps weight down and performance up! The fully welded, 17-4 stainless body is built to withstand pressures from even the largest modern hunting rounds. The Low-Drag suppressor body means less catching moving through brush or in and out of storage or rifle scabbards.
Tunable Bore Reducers
Available bore reducers for 6mm, 6.5mm, 7mm and 30 caliber enable tuning for enhanced sound reduction. Hex key geometry enables easy installation and removal of bore reducers and thread adapters.
SUPPRESSOR SPECS
Length: 6.2"
Diameter: 1.5"
Weight: 7.0 oz (Titanium), 10.9 oz (Steel)
Material: Grade 5 Titanium or Hardened 17-4 Stainless Steel
Finish: High Temp Cerakote
Thread Type: Tapered thread adapter - 1/2x28 and 5/8x24 included
Bore Reducers: 30 Caliber included - additional reducers available (22 cal, 6mm 6.5mm, and 7mm)
Length: 6.5"
Diameter: 1.7"
Weight: 8.8 oz (Titanium), 12.6 oz (Steel)
Material: Grade 5 Titanium or Hardened 17-4 Stainless Steel
Finish: High Temp Cerakote
Thread Type: Tapered thread adapter - 1/2x28 and 5/8x24 included
Bore Reducers: 30 Caliber included - additional reducers available (22 cal, 6mm 6.5mm, and 7mm)
Length: 8.3"
Diameter: 1.7"
Weight: 11.1 oz (Titanium), 17.6 oz (Steel)
Material: Grade 5 Titanium or hardened 17-4 Stainless Steel
Finish: High Temp Cerakote
Thread Type: Tapered thread adapter - 1/2x28 and 5/8x24 included
Bore Reducers: 30 Caliber included - additional reducers available (22 cal, 6mm 6.5mm, and 7mm)